Related Sites

Noise Control
Anechoic Chambers
Sound Level Meters
Audiology Rooms
Noise At Work
School Acoustics

Manufactured to the exact size of your opening (+0, -1/8"), regardless of the size

• assures good seal
• for good appearance (no mismatched components: odd height header air seals, odd width nose gaskets)

Full perimeter air seals are standard on most Models

• provides as close to 100% seal efficiency as is possible with a double-acting door to control:
  • temperature
  • humidity
  • noise
  • dust
  • microbes

Factory aligned and pre-pinned hardware

• assures doors are permanently centered and, therefore, seal at nosing
• saves installation time
• assures proper installation

Choose from three (3) cast alloy cams (¾"rise, 1 ½"rise, Deep Seat) for operating hardware, supplied on all models (except as noted below). "Our reputation hinges on it"

• choose ease of opening / speed of closing
• wind resistance / negative pressure control

Full height shaft, style and mounts attach the V-cam hardware to the door-body and reinforce the door at the jamb (except Ultra-Lite)

• distributes the load of impact
• prevents the cracking of door facings diagonally from the hardware that is common with competitive doors

"EZ Hang" Offset Pivot Hardware supplied on Ultra-Lite (… or ¾" rise cam), Elite, and TL 250

• makes installation very simple and narrow depth fits on almost any type of jamb
• all mounting pieces are stainless steel
• very easy open / gentle close (no tension adjustment)
• stainless steel jamb guards included at no additional cost

Non-rise cantilevered offset hardware is supplied on Flap-R Door Models

All models thicker than ¾" are insulated (most: U = .16, R = 6)

• saves energy

Dozens of features from which to choose

• engineered to meet the requirements of your application for best performance
  • Durability, Energy Savings, Seal, Sanitation (DESSS)

Bumpers and impact panels available for any height and at any location

• provide abrasion resistance and puncture protection where needed

Transoms (patented), header-hung, either flexible ¼" thick reinforced rubber flap (recommended, and two-piece is standard), or 1 3/4" thick horizontally mounted door panels, one-piece or two-piece – specify. (See also Dutch Doors.)

• expose less door opening area to temperature / environmental differential allows less conditioned air to escape for better control / energy savings
• lighter door panel / easier to open / less wear on door

USDA-MPI accepted* materials

• meet sanitation requirements (*for direct contact with food, vs. see "Washdown" **)
• for easy cleaning

** USDA Washdown automatic options: must specify "Washdown" with order (supplied at no charge …at least not until next price sheet):

• single-glazed (single-pane) Rectangular window or, if double-glazed windows are required, widows will be sealed to window frame
• sealed perimeter joints
• aluminum mounts (except galvanized steel on Standard XHD Model)
• 10 ¼" raised lower bearing with internal pad recommended (at additional cost), not required, to facilitate washing floors / covebase